快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.
LNP™ STAT-KON™ Compound PPO Noryl_FMC1010 塑料物性表
LNP* Stat-kon* Noryl_FMC1010 compound is a 10% carbon fiber, static dissipative, foamable resin Nonchlorinated, nonbrominated. UL94 V1 rated. Property values at 20% WR, 0.250" wall.
MECHANICAL | Value | Unit | Standard |
FOAM-MECHANICAL 6.4mm Wt Reduction | 20 | % | - |
Tensile Stress,yield,6.35mm | 460 | kgf/cm² | ASTM D 638 |
Tensile Strain,break,6.35mm | 4.1 | % | ASTM D 638 |
Flexural Stress,yield,6.4mm | 970 | kgf/cm² | ASTM D 790 |
Flexural Modulus,6.4mm | 61100 | kgf/cm² | ASTM D 790 |
IMPACT | Value | Unit | Standard |
FOAM-IMPACT 6.4mm Wt Reduction | 20 | % | - |
Izod Impact,unnotched,23°C,6.4mm | 15 | cm-kgf/cm | ASTM D 4812 |
THERMAL | Value | Unit | Standard |
FOAM-THERMAL 6.4mm Wt Reduction | 20 | % | - |
HDT,0.45 MPa,6.4mm,unannealed | 103 | °C | ASTM D 648 |
HDT,1.82 MPa,6.4mm,unannealed | 97 | °C | ASTM D 648 |
Relative Temp Index,Elec | 50 | °C | UL 746B |
Relative Temp Index,Mech w/impact | 50 | °C | UL 746B |
Relative Temp Index,Mech w/o impact | 50 | °C | UL 746B |
PHYSICAL | Value | Unit | Standard |
FOAM-PHYSICAL 6.4mm Wt Reduction | 20 | % | - |
Specific Gravity | 1.15 | - | ASTM D 792 |
Specific Gravity,foam molded | 0.92 | - | ASTM D 792 |
Mold Shrinkage,flow,3.2mm(5) | 0.15-0.25 | % | SABIC Method |
Mold Shrinkage,xflow,3.2mm(5) | 0.2-0.4 | % | SABIC Method |
ELECTRICAL | Value | Unit | Standard |
FOAM-ELECTRICAL 6.4mm Wt Reduction | 20 | % | - |
Volume Resistivity | 8.00E+03 | Ohm-cm | ASTM D 257 |
Surface Resistivity | 1.30E+04 | Ohm | ASTM D 257 |
FLAME CHARACTERISTICS | Value | Unit | Standard |
FOAM-Flame Class Minimum Density | 0.96 | g/cm³ | - |
UL Recognized,94V-1 Flame Class Rating(3) | 3.98 | mm | UL 94 |
Source GMD,last updated:1993/02/08 |
Parameter Structural Foam Molding | Value | Unit |
Blowing Agent,Physical System | Nitrogen Gas | - |
Concentration Range (Blowing Agent) | 1-3 | % |
Recommended Concentration (Blowing Agent) | 2 | % |
Drying Temperature (Resin) | 105-110 | ℃ |
Drying Time (Resin) | 2-4 | hrs |
Drying Time (Resin,Cumulative) | 8 | hrs |
Melt Temperature | 240-280 | ℃ |
Nozzle Temperature | 265-280 | ℃ |
Front Temperature | 260-280 | ℃ |
Middle Temperature | 250-260 | ℃ |
Rear Temperature | 240-250 | ℃ |
Mold Temperature | 65-80 | ℃ |
Source GMD,last updated:1993/02/08 |