快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
- 产 品：PEEK LX00797C 含碳纤维的聚醚醚酮化合物.静态耗散
- 产 地：美国液氮
- 价 格：电话报价
- 库 存：20吨
- 交 货：江苏苏州
- 苏州希普能：185 5121 3137 谭经理
LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.
LNP™ STAT-KON™ Compound PEEK LX00797C 塑料物性表
Also known as:LNP™ Stat-kon™ Compound PDX-L-00797 CCS Product reorder name:LX00797C
LNP* Stat-Kon* LX00797C is a compound based on Polyetheretherketone containing Carbon Fiber. Characteristics of this grade are: Statically Dissipative, Clean Compound System
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress,brk,Type I,5mm/min | 1580 | kgf/cm² | ASTM D 638 |
| Tensile Strain,brk,Type I,5mm/min | 2.5 | % | ASTM D 638 |
| Flexural Stress,brk,1.3mm/min,50mm span | 1980 | kgf/cm² | ASTM D 790 |
| Flexural Modulus,1.3mm/min,50mm span | 80800 | kgf/cm² | ASTM D 790 |
| IMPACT | Value | Unit | Standard |
| Izod Impact,unnotched,23℃ | 27 | cm-kgf/cm | ASTM D 4812 |
| Izod Impact,notched,23℃ | 5 | cm-kgf/cm | ASTM D 256 |
| THERMAL | Value | Unit | Standard |
| HDT,1.82 MPa,3.2mm,unannealed | 310 | ℃ | ASTM D 648 |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.39 | - | ASTM D 792 |
| Moisture Absorption,50% RH,24 hrs | 0.1 | % | ASTM D 570 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 1.E+03-1.E+06 | Ohm-cm | ASTM D 257 |
| Surface Resistivity | 1.E+03-1.E+06 | Ohm | ASTM D 257 |
| Source GMD,last updated:2011/12/14 | |||
| Parameter Injection Molding | Value | Unit |
| Drying Temperature | 120-150 | ℃ |
| Drying Time | 4 | hrs |
| Maximum Moisture Content | 0.1 | % |
| Melt Temperature | 380-390 | ℃ |
| Front-Zone 3 Temperature | 380-395 | ℃ |
| Middle-Zone 2 Temperature | 365-375 | ℃ |
| Rear-Zone 1 Temperature | 350-360 | ℃ |
| Mold Temperature | 140-165 | ℃ |
| Back Pressure | 0.3-0.7 | MPa |
| Screw Speed | 60-100 | rpm |
| Source GMD,last updated:2011/12/14 | ||