快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
VECTRA® S475 BK010P BLACK
VECTRA® S475 VF2001 NATURAL
VECTRA® S475 VF2201 NATURAL
VECTRA S475 | LCP | Mineral / Glass Reinforced
Description
Super High Flow, High heat Resistance and Low Warp for Thin Parts.
Chemical abbreviation according to ISO 1043-1 : LCP
Inherently flame retardant
UL-Listing V-0 in natural and black at 0.15mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electricals 130℃, mechanicals 130℃.
UL = Underwriters Laboratories (USA)
ISO Data | Physical properties | Value | Unit | Test Standard |
Phys | Density | 1650 | kg/m³ | ISO 1183 |
Mold shrinkage - parallel | 0.0 | % | ISO 294-4 | |
Mold shrinkage - normal | 0.37 | % | ISO 294-4 | |
Mech | Mechanical properties | Value | Unit | Test Standard |
Tensile modulus (1mm/min) | 12300 | MPa | ISO 527-2/1A | |
Tensile stress at break (5mm/min) | 135 | MPa | ISO 527-2/1A | |
Tensile strain at break (5mm/min) | 1.8 | % | ISO 527-2/1A | |
Flexural modulus (23℃) | 12000 | MPa | ISO 178 | |
Flexural strength (23℃) | 180 | MPa | ISO 178 | |
Flexural strain @ break | 2.4 | % | ISO 178 | |
Charpy notched impact strength @ 23℃ | 5 | kJ/m² | ISO 179/1eA | |
Notched impact strength (Izod) @ 23℃ | 5 | kJ/m² | ISO 180/1A | |
Therm | Thermal properties | Value | Unit | Test Standard |
Melting temperature (10℃/min) | 350 | ℃ | ISO 11357-1,-2,-3 | |
DTUL @ 1.8 MPa | 305 | ℃ | ISO 75-1/-2 | |
DTUL @ 8.0 MPa | 213 | ℃ | ISO 75-1/-2 | |
Coeff.of linear therm. expansion (parallel) | 0.01 | E-4/℃ | ISO 11359-2 | |
Coeff.of linear therm. expansion (normal) | 0.02 | E-4/℃ | ISO 11359-2 | |
Flammability at thickness h | V-0 | class | UL94 | |
Elec | Electrical properties | Value | Unit | Test Standard |
Relative permittivity - 1 MHz | 3.7 | - | IEC 60250 | |
Dissipation factor - 1 MHz | 80 | E-4 | IEC 60250 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.01%
VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40℃. The time between drying and processing should be as short as possible.
For subsequent storage of the material in the dryer until processed the temperature does
Drying time (h):6
Drying temperature (℃):150 - 150