快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
Datasheet Desmopan DP 1085A 数据
injection molding grade; hydrolysis-stabilised; high mechanical strength; Application; Injection molded engineering parts; Screenpacks
☆These property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.
Impact properties: N = non-break, P = partial break, C = complete break
ISO Shortname: | |||||||
Property | Test Condition | Unit | Standard | Value | |||
. | drying according to specifications annealed - | ||||||
Mechanical properties(23 ℃/50 % r. h.) | |||||||
☆ | shore hardness, method A | . | - | ISO 868 | . | 85 | . |
. | Ultimate tensile strength | 200 mm/min | MPa | DIN 53504 | . | 36 | . |
. | Strain at break | 200 mm/min | % | DIN 53504 | . | 716 | . |
. | Stress at 100 % strain | 200 mm/min | MPa | DIN 53504 | . | 5,2 | . |
. | Stress at 300 % strain | 200 mm/min | MPa | DIN 53504 | . | 9,1 | . |
☆ | Compression set | 24 h; 70 ℃ | % | ISO 815 | . | 41 | . |
☆ | Compression set | 72 h; 23 ℃ | % | ISO 815 | . | 19 | . |
☆ | Abrasion resistance | . | mm³ | ISO 4649 | . | 11 | . |
. | Impact resilience | . | % | ISO 4662 | . | 41 | . |
. | Tear propagation resistance | 500 mm/min | kN/m | ISO 34-1 | . | 74 | . |
Thermal properties | |||||||
. | Tensile storage modulus | -20 ℃ | MPa | ISO 6721-1,-4 | . | 210 | . |
. | Tensile storage modulus | 20 ℃ | MPa | ISO 6721-1,-4 | . | 35 | . |
. | Tensile storage modulus | 60 ℃ | MPa | ISO 6721-1,-4 | . | 23 | . |
Other properties(23 ℃) | |||||||
☆ | Density | . | kg/m³ | ISO 1183-1 | . | . | 1208 |
Molding conditions | |||||||
. | Injection molding-Melt temperature | . | ℃ | - | 190 - 230 | . | . |
. | Injection molding-Mold temperature | . | ℃ | - | . | . | 20 - 40 |
. | Maximum drying temperature | . | ℃ | - | . | . | 90 |