快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
Description
Zonyl® MP 1300 fluoroadditive is a free-flowing white powder designed for use as an additive in other materials to impart low-surface energy and other fluoropolymer attributes. Zonyl® MP 1300 may improve the wear resistance of host materials such as thermoplastics or coating materials and enhance their nonstick, lubricity, and frictional characteristics. Added to lubricants, it can enhance performance under severe conditions. Zonyl® MP 1300 can be used at temperatures from -190 to 250℃ (-310 to 480℉).
Zonyl® MP 1300 is generally intended to be used as an additive, although it has been used alone as a dry lubricant. Its properties (see Table 1) make this material unsuitable as a molding or extrusion resin. It is not a replacement for any of the Teflon® high molecular weight fluoropolymer resins in these applications.
Table 1
Typical Property Data for
Zonyl ® MP 1300 Fluoroadditive
Property | Test Method |
Unit | Value |
Average Bulk | ASTM | g/L | 425 |
Density | D4894 | ||
Melting Peak | ASTM | ℃ | 325±5 |
Temperature | D4894 | ℉ | 617 |
Particle Size | Laser | µm | 10%<3 |
Distribution | Microtrac | Avg.12 | |
(Volume Basis) | 90%<25 | ||
Specific | Nitrogen | m2/g | 1.5-3 |
Surface Area | Adsorption |
Note: Meets ASTM D5675, Type I, Grade 1, Class A or B.
Zonyl® MP 1300 is inert to nearly all industrial chemicals and solvents. It is a good electrical insulator, does not absorb water, and is highly resistant to weathering.
Typical Applications
Zonyl® MP 1300 is used as an additive (at up to about 20% by weight) in host materials, e.g., plastics, to improve nonstick performance and enhance tribological characteristics. The tendency for surface blemishes to appear in injection molded thermoplastic parts is minimized with this additive, as is the likelihood of plateout. Plastics that can benefit in this manner include polycarbonates, polyacetals, polyamides, polyesters, polysulfides, and polyfulfones.
Safety Precautions
WARNING!
VAPORS CAN BE LIBERATED THAT MAY BE HAZARDOUS IF INHALED.
Before using Zonyl® MP 1300, read the Material Safety Data Sheet and the detailed information in the “Guide to the Safe Handling of Fluoropolymer Resins,” latest edition, published by the Fluoro-polymers Division of The Society of the Plastics Industry—available from DuPont.
Open and use containers only in well-ventilated areas using local exhaust ventilation (LEV). Vapors and fumes liberated during hot processing, or from smoking tobacco or cigarettes contaminated with Zonyl® MP 1300, may cause flu-like symptoms (chills, fever, sore throat) that may not occur until several hours after exposure and typically pass within 24 hours. Vapors and fumes liberated during hot processing should be exhausted completely from the work area; contamination of tobacco with polymers should be avoided.
Mixtures with some finely divided metals, such as magnesium or aluminum, can be flammable or explosive under some conditions.
Packaging
Zonyll® MP 1300 is packaged in 25-kg (55.1-lb) drums. Eight 25-kg drums are packaged on one pallet for ease of shipping, handling, and storage.
Zonyl ® MP 1300 Fluoroadditive Sales Specifications
Property | Test Method |
Unit | Value |
Bulk Density | D4895 | g/L | 225-600 |
Average Particle Size (Volume Basis) |
D4464 | µm | 8-20 |
Specific Surface Area | D4567 | m/g2 | 0.8-4.5 |
Melt Flow Rate | D1238 | g/10 min | >0.1 |
Color | E313 | - | White |
Note: Meets ASTM D5675, Type I, Grade 1, Class A or B.