旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
POM KE004 含有碳纤维.导电共聚甲醛树脂
  • 产 品:POM KE004 含有碳纤维.导电共聚甲醛树脂
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™ STAT-KON™ Compound POM KE004 塑料物性表

Also known as:LNP™ Stat-kon™ Compound KC-1004 Product reorder name:KE004
LNP* Stat-kon* KE004 is a compound based on Acetal Copolymer resin containing Carbon Fiber. Added features of this material include: Electrically Conductive.

MECHANICAL Value Unit Standard
Tensile Stress,yield 1230 kgf/cm² ASTM D 638
Tensile Stress,break 1230 kgf/cm² ASTM D 638
Tensile Strain,yield 1.6 % ASTM D 638
Tensile Strain,break 1.6 % ASTM D 638
Tensile Modulus,50mm/min 147600 kgf/cm² ASTM D 638
Flexural Stress 1540 kgf/cm² ASTM D 790
Flexural Modulus 112400 kgf/cm² ASTM D 790
Tensile Stress,yield 110 MPa ISO 527
Tensile Stress,break 110 MPa ISO 527
Tensile Strain,yield 1.4 % ISO 527
Tensile Strain,break 1.4 % ISO 527
Tensile Modulus,1mm/min 12990 MPa ISO 527
Flexural Stress 160 MPa ISO 178
Flexural Modulus 11500 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 43 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 4 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 111 cm-kgf ASTM D 3763
Multiaxial Impact 25 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 25 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 5 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 162 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 160 ASTM D 648
CTE,-40℃ to 40℃,flow 6.84E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 3.06E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 6.90E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 3.10E-05 1/℃ ISO 11359-2
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 163 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 160 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.47 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.2 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.6-0.8 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 1.6-1.8 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 0.69 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1.7 % ISO 294
Density 1.47 g/cm³ ISO 1183
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+02-1.E+06 Ohm ASTM D 257
Source GMD,last updated:2010/12/16
Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Melt Temperature 200-215
Front-Zone 3 Temperature 210-220
Middle-Zone 2 Temperature 195-205
Rear-Zone 1 Temperature 175-190
Mold Temperature 80-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2010/12/16