快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.
LNP™ STAT-KON™ Compound POM KE002 塑料物性表
Also known as:LNP™ Stat-kon™ Compound KC-1002 Product reorder name:KE002
LNP* Stat-Kon* KE002 is a compound based on Acetal resin containing Carbon Fiber. A characteristc of this grade is statically conductive.
MECHANICAL | Value | Unit | Standard |
Tensile Stress,brk,Type I,5mm/min | 1080 | kgf/cm² | ASTM D 638 |
Tensile Strain,brk,Type I,5mm/min | 2.4 | % | ASTM D 638 |
Flexural Stress,brk,1.3mm/min,50mm span | 1645580 | kgf/cm² | ASTM D 790 |
Flexural Modulus,1.3mm/min,50mm span | 0 | kgf/cm² | ASTM D 790 |
Tensile Stress,break,5mm/min | 104 | MPa | ISO 527 |
Tensile Strain,break,5mm/min | 2 | % | ISO 527 |
Tensile Modulus,1mm/min | 8220 | MPa | ISO 527 |
Flexural Stress | 154 | MPa | ISO 178 |
Flexural Modulus,2mm/min | 7050 | MPa | ISO 178 |
IMPACT | Value | Unit | Standard |
Izod Impact,unnotched,23℃ | 38 | cm-kgf/cm | ASTM D 4812 |
Izod Impact,notched,23℃ | 4 | cm-kgf/cm | ASTM D 256 |
Izod Impact,notched 80*10*4 +23℃ | 4 | kJ/m² | ISO 180/1A |
THERMAL | Value | Unit | Standard |
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm | 161 | ℃ | ISO 75/Af |
PHYSICAL | Value | Unit | Standard |
Specific Gravity | 1.43 | - | ASTM D 792 |
Mold Shrinkage,flow,24 hrs(5) | 0.5-0.7 | % | ASTM D 955 |
Mold Shrinkage,xflow,24 hrs(5) | 1-3 | % | ASTM D 955 |
ELECTRICAL | Value | Unit | Standard |
Surface Resistivity | 1.E+02-1.E+05 | Ohm | ASTM D 257 |
Source GMD,last updated:2011/12/14 |
Parameter Injection Molding | Value | Unit |
Drying Temperature | 80 | ℃ |
Drying Time | 4 | hrs |
Melt Temperature | 200-215 | ℃ |
Front-Zone 3 Temperature | 210-220 | ℃ |
Middle-Zone 2 Temperature | 195-205 | ℃ |
Rear-Zone 1 Temperature | 175-190 | ℃ |
Mold Temperature | 80-110 | ℃ |
Back Pressure | 0.2-0.3 | MPa |
Screw Speed | 30-60 | rpm |
Source GMD,last updated:2011/12/14 |