旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
POM KD000 含碳粉,导电聚甲醛树脂
  • 产 品:POM KD000 含碳粉,导电聚甲醛树脂
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP STAT-KON* ACETAL COMPOUND
ADD TAILORED ELECTRICAL PROPERTIES TO ACETALS
Acetal-based LNP Stat-Kon compounds contain electrically active additives that provide controlled surface resistivity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding.

LNP™STAT-KON™ Compound POM KD000 塑料数据物性表

Also known as:LNP™ Stat-kon™ Compound K-
Product reorder name:KD000
LNP STAT-KON KD000* is also know as: LNP STAT-KON K, LNP STAT-KON KXC. It is a compound based on Acetal resin containing Carbon Powder. Added features of this material include: Electrically Conductive.

MECHANICAL Value Unit Standard
Tensile Stress,yield 590 kgf/cm² ASTM D 638
Tensile Stress,break 550 kgf/cm² ASTM D 638
Tensile Strain,yield 3.6 % ASTM D 638
Tensile Strain,break 7.2 % ASTM D 638
Tensile Modulus,50mm/min 35600 kgf/cm² ASTM D 638
Flexural Stress 960 kgf/cm² ASTM D 790
Flexural Modulus 33100 kgf/cm² ASTM D 790
Tensile Stress,yield 53 MPa ISO 527
Tensile Stress,break 47 MPa ISO 527
Tensile Strain,yield 5 % ISO 527
Tensile Strain,break 20 % ISO 527
Tensile Modulus,1mm/min 3000 MPa ISO 527
Flexural Stress 82 MPa ISO 178
Flexural Modulus 3200 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 81 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 3 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 50 cm-kgf ASTM D 3763
Multiaxial Impact 15 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 37 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 5 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,1.82 MPa,3.2mm,unannealed 108 ASTM D 648
CTE,-40℃ to 40℃,flow 1.01E-04 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 1.01E-04 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 1.02E-04 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 1.01E-04 1/℃ ISO 11359-2
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 105 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.45 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.28 % ASTM D 570
Mold shrinkage,flow(mold temp=60℃) 1.2-1.3 % SABIC Method
Mold shrinkage,flow(mold temp=100℃) 1.5-1.6 % SABIC Method
Mold Shrinkage,flow,24 hrs(5) 1.5-3.5 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 1.5-3.5 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 1.5-3.5 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1.5-3.5 % ISO 294
Mold shrinkage,xflow(mold temp=60℃) 0.9-1 % SABIC Method
Mold shrinkage,xflow(mold temp=100℃) 1.1-1.2 % SABIC Method
Density 1.45 g/cm³ ISO 1183
Moisture Absorption(23℃/50% RH) 0.33 % ISO 62
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+02-1.E+04 Ohm ASTM D 257
FLAME CHARACTERISTICS Value Unit Standard
UL Recognized,94HB Flame Class Rating(3) 0.7 mm UL 94
Source GMD,last updated:2009/01/06

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【LNP™ STAT-KON™ Compound POM KD000