旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
POM 588P NC010 中高粘,热稳定,尺寸稳定
  • 产 品:POM 588P NC010 中高粘,热稳定,尺寸稳定
  • 产 地:DuPont 杜邦
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

DuPont™ Delrin® 数据
杜邦™塑钢®
acetal resin
缩醛树脂
Unreinforced Resins
增强树脂

Delrin® 588P NC010 is a medium viscosity acetal homopolymer resin for injection molding. It has good thermal stability, and modifications for more precise molding (reduced warpage,good dimensional stability).
塑钢®588p nc010是中高粘度聚甲醛均聚物树脂注塑成型。它具有良好的热稳定性,并修改为更精确成型(减少翘曲,良好的尺寸稳定性)。

Property
Test Method
Units
Value
Identification
Resin Identification
Part Marking Code
ISO 1043
ISO 11469
 
POM
>POM<
Mechanical
Yield Stress
Yield Strain
Nominal Strain at Break
Tensile Modulus
Notched Charpy Impact Strength
ISO 527
ISO 527
ISO 527
ISO 527
ISO 179/1eA
MPa (kpsi)
%
%
MPa (kpsi)
2
kJ/m
73 (10.6)
12
25
3200 (465)
8
Thermal
Deflection Temperature
1.80MPa
Melting Temperature
10°C/min
ISO 75-1/-2
ISO 11357-1/-3
°C (°F)
°C (°F)
97 (205)
178 (352)
Rheological
Melt Mass-Flow Rate
190°C, 2.16kg
ISO 1133
g/10 min
15

Property
Test Method
Units
Value
Flammability
Flammability Classification
0.8mm
1.5mm
3.0mm
Flammability Classification
0.8mm
1.5mm
3.0mm
IEC 60695-11-10
UL94
 
HB
HB
HB
HB
HB
HB
Temperature Index
RTI, Electrical
0.8mm
1.5mm
3.0mm
RTI, Impact
0.8mm
1.5mm
3.0mm
RTI, Strength
0.8mm
1.5mm
3.0mm
UL 746B
UL 746B
UL 746B
°C
°C
°C
50
110
110
50
85
90
50
90
95

Property
Test Method
Units
Value
Other
Density
Hardness, Rockwell
Scale R
Water Absorption
Equilibrium 50%RH, 1.0mm
Molding Shrinkage
Normal, 2.0mm
Parallel, 2.0mm
ISO 1183
ISO 2039/2
ISO 62, Similar to
ISO 294-4
3      3
kg/m (g/cm )
%
%
1420 (1.42)
120
0.3
1.8
1.9
Processing
Melt Temperature Range
Melt Temperature Optimum
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Moisture Content
Hold Pressure Range
 
°C (°F)
°C (°F)
°C (°F)
°C (°F)
h
°C (°F)
%
MPa (kpsi)
210-220 (410-430)
215 (420)
80-100 (175-210)
90 (195)
2-4
80 (175)
<0.2
80-100 (12-15)

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006

湘樟塑胶网版权:http://www.pa66-suliao.com/product/gcsuliao/POM/.