旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
POM 100T NC010 高增韧,高粘度,高耐冲击
  • 产 品:POM 100T NC010 高增韧,高粘度,高耐冲击
  • 产 地:DuPont 杜邦
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

DuPont™ Delrin® 数据
杜邦™塑钢®
acetal resin
缩醛树脂

Extrusion Resins
挤出树脂
Delrin® 100T NC010 is a toughened, high viscosity acetal homopolymer grade with high impact resistance.
塑钢®100T NC010是增韧,高粘度聚甲醛均聚物,具有高耐冲击级。

Property
Test Method
Units
Value
Identification
Resin Identification
Part Marking Code
ISO 1043
ISO 11469
 
POM-I
>POM-I<
Mechanical
Yield Stress
Yield Strain
Strain at Break
50mm/min
Nominal Strain at Break
Tensile Modulus
Flexural Modulus
Notched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
Unnotched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
ISO 527
ISO 527
ISO 527
ISO 527
ISO 527
ISO 178
ISO 179/1eA
ISO 179/1eU
MPa (kpsi)
%
%
%
MPa (kpsi)
MPa (kpsi)
2
kJ/m
2
kJ/m
52 (7.5)
25
>50
>50
1900 (276)
1700 (245)
13
25
NB
NB

Property
Test Method
Units
Value
Thermal
Deflection Temperature
0.45MPa
1.80MPa
Melting Temperature
10°C/min
CLTE, Parallel
23 - 55°C (73 - 130°F)
ISO 75f
ISO 11357-1/-3
ISO 11359-1/-2
°C (°F)
°C (°F)
E-4/C (E-4/F)
130 (265)
72 (160)
178 (352)
1.2 (0.67)
Rheological
Melt Mass-Flow Rate
190°C, 2.16kg
ISO 1133
g/10 min
2.0
Electrical
Relative Permittivity
1E6 Hz
Dissipation Factor
1E6 Hz
CTI
IEC 60250
IEC 60250
IEC 60112
E-4
V
3.1
90
600
Other
Density
Hardness, Rockwell
Scale M
Scale R
Water Absorption
Equilibrium 50%RH
Saturation, immersed
Molding Shrinkage
Normal, 2.0mm
Parallel, 2.0mm
ISO 1183
ISO 2039/2
ISO 62, Similar to
ISO 294-4
3      3
kg/m (g/cm )
%
%
1370 (1.37)
59
113
0.3
0.9
1.9
2.1

Property
Test Method
Units
Value
Processing
Melt Temperature Range
Melt Temperature Optimum
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Moisture Content
Hold Pressure Range
 
°C (°F)
°C (°F)
°C (°F)
°C (°F)
h
°C (°F)
%
MPa (kpsi)
200-210 (390-410)
205 (400)
40-60 (100-140)
50 (122)
2-4
80 (175)
<0.05
60-80 (9-12)

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.

转自湘樟塑胶网:http://www.pa66-suliao.com/product/gcsuliao/POM/