旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
POM 100PE NC010 高粘度,热稳定,韧性好
  • 产 品:POM 100PE NC010 高粘度,热稳定,韧性好
  • 产 地:DuPont 杜邦
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

DuPont™ Delrin®
杜邦™塑钢®
acetal resin
缩醛树脂

Extrusion Resins
挤出树脂
Delrin® 100PE is a high viscosity acetal homopolymer, an enhanced version of Delrin® 100P with extremely low VOC emissions. It has improved processing thermal stability, good mechanical properties, and toughness.
塑钢®100pe是高粘度聚甲醛均聚物,具有极低的挥发性有机化合物的排放的Delrin®100P增强版。它改善了加工热稳定性,机械性能好,韧性。

Property
Test Method
Units
Value
Identification
Resin Identification
Part Marking Code
ISO 1043
ISO 11469
 
POM
>POM<
Mechanical
Yield Stress
Yield Strain
Nominal Strain at Break
Tensile Modulus
Tensile Creep Modulus
1h
1000h
Flexural Modulus
Notched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
Unnotched Charpy Impact Strength
ISO 527
ISO 527
ISO 527
ISO 527
ISO 899
ISO 178
ISO 179/1eA
ISO 179/1eU
MPa (kpsi)
%
%
MPa (kpsi)
MPa (kpsi)
MPa (kpsi)
2
kJ/m
2
kJ/m
70 (10.2)
22
45
2900 (420)
2700 (390)
1500 (217)
2600 (377)
10
14
N

Property
Test Method
Units
Value
Thermal
Deflection Temperature
1.80MPa
Melting Temperature
10°C/min
CLTE, Parallel
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
55 - 100°C (130 - 212°F)
CLTE, Normal
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
55 - 100°C (130 - 212°F)
Specific Heat
Vicat Softening Temperature
50N, 50°C/h
ISO 75-1/-2
ISO 11357-1/-3
ISO 11359-1/-2
ISO 11359-1/-2
ISO 11357-4
ISO 306
°C (°F)
°C (°F)
E-4/C (E-4/F)
E-4/C (E-4/F)
J/kg K (Btu/lb F)
°C (°F)
92 (198)
178 (352)
1.0 (0.56)
1.1 (0.61)
1.6 (0.89)
1.0 (0.56)
1.1 (0.61)
1.6 (0.89)
3000 (0.71)
160 (320)
Rheological
Melt Mass-Flow Rate
190°C, 2.16kg
ISO 1133
g/10 min
2.5
Other
Density
Water Absorption
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Molding Shrinkage
Normal, 2.0mm
Parallel, 2.0mm
ISO 1183
ISO 62, Similar to
ISO 294-4
3           3
kg/m (g/cm )
%
%
1420 (1.42)
0.3
0.6
1.4
2.0
2.2

Property
Test Method
Units
Value
Processing - Injection Molding
Melt Temperature Range
Melt Temperature Optimum
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Moisture Content
Hold Pressure Range
 
°C (°F)
°C (°F)
°C (°F)
°C (°F)
h
°C (°F)
%
MPa (kpsi)
200-210 (390-410)
205 (400)
80-100 (175-210)
90 (195)
2-4
80 (175)
<0.2
90-110 (13-16)

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2010