旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PC/ABS FXC810SK 高耐热,良好的流动
  • 产 品:PC/ABS FXC810SK 高耐热,良好的流动
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Cycoloy* Visualfx* Resin
Tough Yet Beautiful
Cycoloy PC/ABS Visualfx Resins provide molded-in effects that can eliminate the need for modifications after molding while still offering the impact and processing advantage that Cycoloy Resin is known for. This can provide cleaner and more vibrant part aesthetics that will last as long as the part lasts. Visualfx Resins include Sparkle and Porcelain effects as well as several metallic and natural material effects. Available in a variety of colors and base resins.

Cycoloy* Resin FXC810SK 数据
Color package may affect performance. Visual Fx PC+ABS in various metallic (sparkle) colors. High heat/good flow characteristics. Appliance/automotive/telecommunication uses.

Property
TYPICAL PROPERTIES (1)

MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,50mm/min 520 kgf/cm² ASTM D 638
Tensile Stress,brk,Type I,50mm/min 450 kgf/cm² ASTM D 638
Tensile Strain,yld,Type I,50mm/min 5 % ASTM D 638
Tensile Strain,brk,Type I,50mm/min 50 % ASTM D 638
Tensile Modulus,50mm/min 25300 kgf/cm² ASTM D 638
Flexural Stress,yld,1.3mm/min,50mm span 770 kgf/cm² ASTM D 790
Flexural Modulus,1.3mm/min,50mm span 24600 kgf/cm² ASTM D 790
Tensile Stress,yield,5mm/min 55 MPa ISO 527
Tensile Stress,break,5mm/min 45 MPa ISO 527
Tensile Stress,yield,50mm/min 55 MPa ISO 527
Tensile Stress,break,50mm/min 45 MPa ISO 527
Tensile Strain,yield,5mm/min 5 % ISO 527
Tensile Strain,break,5mm/min 15 % ISO 527
Tensile Strain,yield,50mm/min 5 % ISO 527
Tensile Strain,break,50mm/min 15 % ISO 527
Tensile Modulus,1mm/min 2400 MPa ISO 527
Flexural Stress,yield,2mm/min 82 MPa ISO 178
Flexural Modulus,2mm/min 2400 MPa ISO 178
Hardness,H358/30 99 MPa ISO 2039-1
Hardness,Rockwell R 121 - ISO 2039-2
IMPACT Value Unit Standard
Izod Impact,notched,23℃ 43 cm-kgf/cm ASTM D 256
Instrumented Impact Total Energy,23℃ 414 cm-kgf ASTM D 3763
Izod Impact,notched 80*10*4 +23℃ 24 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -30℃ 12 kJ/m² ISO 180/1A
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm 25 kJ/m² ISO 179/1eA
Charpy -30℃,V-notch Edgew 80*10*4 sp=62mm 13 kJ/m² ISO 179/1eA
THERMAL Value Unit Standard
Vicat Softening Temp,Rate B/50 143 ASTM D 1525
HDT,0.45 MPa,3.2mm,unannealed 131 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 112 ASTM D 648
CTE,-40℃ to 40℃,flow 7.20E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 7.20E-05 1/℃ ASTM E 831
Thermal Conductivity 0.2 W/m-℃ ISO 8302
CTE,23℃ to 60℃,flow 8.00E-05 1/℃ ISO 11359-2
CTE,23℃ to 60℃,xflow 8.00E-05 1/℃ ISO 11359-2
Ball Pressure Test,125℃ +/- 2℃ PASSES - IEC 60695-10-2
Vicat Softening Temp,Rate B/50 128 ISO 306
Vicat Softening Temp,Rate B/120 130 ISO 306
HDT/Be,0.45MPa Edgew 120*10*4 sp=100mm 128 ISO 75/Be
HDT/Ae,1.8 MPa Edgew 120*10*4 sp=100mm 108 ISO 75/Ae
PHYSICAL Value Unit Standard
Specific Gravity 1.18 - ASTM D 792
Mold Shrinkage,flow,3.2mm(5) 0.4-0.6 % SABIC Method
Melt Flow Rate,260℃/5.0 kgf 22 g/10 min ASTM D 1238
Density 1.18 g/cm³ ISO 1183
Melt Volume Rate,MVR at 260℃/5.0 kg 22 cm³/10 min ISO 1133
ELECTRICAL Value Unit Standard
Volume Resistivity >1.E+15 Ohm-cm IEC 60093
Surface Resistivity,ROA >1.E+15 Ohm IEC 60093
Dielectric Strength,in oil,0.8mm 35 kV/mm IEC 60243-1
Dielectric Strength,in oil,1.6mm 25 kV/mm IEC 60243-1
Dielectric Strength,in oil,3.2mm 17 kV/mm IEC 60243-1
Relative Permittivity,1 MHz 2.7 - IEC 60250
Dissipation Factor,50/60 Hz 0.003 - IEC 60250
Dissipation Factor,1 MHz 0.005 - IEC 60250
Relative Permittivity,50/60 Hz 2.8 - IEC 60250
Source GMD,last updated:2002/05/16

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
(5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
PC/ABS合金塑料报价网:http://www.pa66-suliao.com/product/gcsuliao/PC/ABS/