旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PC/ABS MC9000 高耐热,高韧性,高流动
  • 产 品:PC/ABS MC9000 高耐热,高韧性,高流动
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Cycoloy* Auto Non-FR Resin
Non-Flame Retardant Resins for Automotive
A wide range of PC/ABS resin grades offer features such as low gloss, high heat, high impact resistance and others suitable for various automotive interior applications.

Cycoloy* Resin MC9000 数据
AUTOMOTIVE. PC+ABS; high heat resistant. Ductile at room temperature. Excellent flow.

Property
TYPICAL PROPERTIES (1)

MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,50mm/min 600 kgf/cm² ASTM D 638
Tensile Strain,yld,Type I,50mm/min 5 % ASTM D 638
Tensile Strain,brk,Type I,50mm/min 75 % ASTM D 638
Tensile Modulus,50mm/min 22400 kgf/cm² ASTM D 638
Flexural Stress,yld,1.3mm/min,50mm span 880 kgf/cm² ASTM D 790
Flexural Modulus,1.3mm/min,50mm span 24200 kgf/cm² ASTM D 790
IMPACT Value Unit Standard
Izod Impact,notched,23℃ 65 cm-kgf/cm ASTM D 256
Izod Impact,notched,-30℃ 27 cm-kgf/cm ASTM D 256
Instrumented Impact Total Energy,23℃ 622 cm-kgf ASTM D 3763
Instrumented Impact Total Energy,-30℃ 599 cm-kgf ASTM D 3763
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 126 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 110 ASTM D 648
CTE,-40℃ to 40℃,flow 7.20E-05 1/℃ ASTM E 831
PHYSICAL Value Unit Standard
Specific Gravity 1.14 - ASTM D 792
Mold Shrinkage,flow,3.2mm(5) 0.5-0.7 % SABIC Method
Melt Flow Rate,260℃/5.0 kgf 22 g/10 min ASTM D 1238
Source GMD,last updated:2000/01/05
Parameter Injection Molding Value Unit
Drying Temperature 105-110
Drying Time 3-4 hrs
Drying Time(Cumulative) 8 hrs
Maximum Moisture Content 0.04 %
Melt Temperature 275-300
Nozzle Temperature 275-300
Front-Zone 3 Temperature 260-300
Middle-Zone 2 Temperature 255-295
Rear-Zone 1 Temperature 250-290
Mold Temperature 60-90
Back Pressure 0.3-0.7 MPa
Screw Speed 40-70 rpm
Shot to Cylinder Size 30-80 %
Vent Depth 0.038-0.076 mm
Source GMD,last updated:2000/01/05
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
(5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

PC GPN2020DF 复合强化低翘曲阻燃级