PC/ABS CY9650 高冲击,高流动,耐热老化

快速查找

主营塑料

更多>>

产品推荐

联系我们

塑胶原料报价

产品：PC/ABS CY9650 高冲击,高流动,耐热老化
产地：沙伯基础创新
价格：电话报价
库存：20吨
交货：江苏苏州
苏州希普能：185 5121 3137 谭经理

上一篇：PC/ABS CY9640 高冲击,高流动,耐热老化下一篇：PC/ABS MC8100 挤出吹塑级

Cycoloy* Auto Non-FR Resin
Non-Flame Retardant Resins for Automotive
A wide range of PC/ABS resin grades offer features such as low gloss, high heat, high impact resistance and others suitable for various automotive interior applications.

Cycoloy* Resin CY9650 数据
PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat Aging

Property
TYPICAL PROPERTIES ⁽¹⁾

MECHANICAL	Value	Unit	Standard
Tensile Stress,yld,Type I,50mm/min	550	kgf/cm²	ASTM D 638
Tensile Stress,brk,Type I,50mm/min	540	kgf/cm²	ASTM D 638
Tensile Strain,yld,Type I,50mm/min	4.5	%	ASTM D 638
Tensile Strain,brk,Type I,50mm/min	120	%	ASTM D 638
Tensile Modulus,5mm/min	23400	kgf/cm²	ASTM D 638
Flexural Stress,yld,1.3mm/min,50mm span	900	kgf/cm²	ASTM D 790
Flexural Modulus,1.3mm/min,50mm span	23400	kgf/cm²	ASTM D 790
Tensile Stress,yield,50mm/min	54	MPa	ISO 527
Tensile Stress,break,50mm/min	53	MPa	ISO 527
Tensile Strain,yield,50mm/min	4.5	%	ISO 527
Tensile Strain,break,50mm/min	120	%	ISO 527
Tensile Modulus,1mm/min	2250	MPa	ISO 527
Flexural Stress,yield,2mm/min	82	MPa	ISO 178
Flexural Modulus,2mm/min	2200	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact,notched,23℃	60	cm-kgf/cm	ASTM D 256
Izod Impact,notched,-30℃	43	cm-kgf/cm	ASTM D 256
Instrumented Impact Total Energy,23℃	560	cm-kgf	ASTM D 3763
Instrumented Impact Total Energy,-30℃	683	cm-kgf	ASTM D 3763
Izod Impact,notched 80103 +23℃	65	kJ/m²	ISO 180/1A
Izod Impact,notched 80103 -30℃	30	kJ/m²	ISO 180/1A
Charpy 23℃,V-notch Edgew 80103 sp=62mm	65	kJ/m²	ISO 179/1eA
Charpy -30℃,V-notch Edgew 80103 sp=62mm	30	kJ/m²	ISO 179/1eA
THERMAL	Value	Unit	Standard
Vicat Softening Temp,Rate B/50	126	℃	ASTM D 1525
HDT,1.82 MPa,3.2mm,unannealed	107	℃	ASTM D 648
CTE,-40℃ to 40℃,flow	7.00E-05	1/℃	ASTM E 831
CTE,-40℃ to 40℃,xflow	7.00E-05	1/℃	ASTM E 831
Thermal Conductivity	0.2	W/m-℃	ISO 8302
CTE,-40℃ to 40℃,flow	8.00E-05	1/℃	ISO 11359-2
CTE,-40℃ to 40℃,xflow	8.00E-05	1/℃	ISO 11359-2
Ball Pressure Test,75℃ +/- 2℃	Pass	-	IEC 60695-10-2
Vicat Softening Temp,Rate B/50	126	℃	ISO 306
Vicat Softening Temp,Rate B/120	127	℃	ISO 306
HDT/Bf,0.45 MPa Flatw 80104 sp=64mm	126	℃	ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80104 sp=64mm	105	℃	ISO 75/Af
Relative Temp Index,Elec	60	℃	UL 746B
Relative Temp Index,Mech w/impact	60	℃	UL 746B
Relative Temp Index,Mech w/o impact	60	℃	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.14	-	ASTM D 792
Mold Shrinkage,flow,3.2mm(5)	0.5-0.7	%	SABIC Method
Mold Shrinkage,xflow,3.2mm(5)	0.5-0.7	%	SABIC Method
Melt Flow Rate,260℃/5.0 kgf	26	g/10 min	ASTM D 1238
Density	1.14	g/cm³	ISO 1183
Water Absorption,(23℃/sat)	0.4	%	ISO 62
Moisture Absorption(23℃/50% RH)	0.15	%	ISO 62
Melt Volume Rate,MVR at 260℃/5.0 kg	25	cm³/10 min	ISO 1133
Melt Viscosity,260℃,1500 sec-1	170	Pa-s	ISO 11443
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	>1.E+15	Ohm-cm	IEC 60093
Surface Resistivity,ROA	>1.E+15	Ohm	IEC 60093
Dielectric Strength,in oil,0.8mm	35	kV/mm	IEC 60243-1
Dielectric Strength,in oil,1.6mm	25	kV/mm	IEC 60243-1
Dielectric Strength,in oil,3.2mm	17	kV/mm	IEC 60243-1
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized,94HB Flame Class Rating(3)	1.5	mm	UL 94
UL Recognized,94HB Flame Class Rating 2nd value(3)	3	mm	UL 94
Source GMD,last updated:2004/11/19

Parameter Injection Molding	Value	Unit
Drying Temperature	95-105	℃
Drying Time	2-4	hrs
Maximum Moisture Content	0.02	%
Melt Temperature	260-290	℃
Nozzle Temperature	240-280	℃
Front-Zone 3 Temperature	250-290	℃
Middle-Zone 2 Temperature	250-290	℃
Rear-Zone 1 Temperature	230-260	℃
Hopper Temperature	60-80	℃
Mold Temperature	60-90	℃
Source GMD,last updated:2004/11/19

代理沙伯基础创新塑料PC/ABS合金：网址：http://www.pa66-suliao.com/product/gcsuliao/PC/ABS/

塑料种类

快速查找

主营塑料

产品推荐

联系我们