旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PC DX98735H 聚碳酸酯化合物,含专有的填料,医疗级PC
  • 产 品:PC DX98735H 聚碳酸酯化合物,含专有的填料,医疗级PC
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP* Colorcomp* Compound
LNP Colorcomp All Series
LNP* Colorcomp* resins contain colorants and special effects for a dazzling spectrum of colored materials. Among the offerings are opaque, translucent, and transparent resins, plus special effects, including edge glow, sparkle, glow, pearlescent, and thermochromic. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™Colorcomp™ Compound PC DX98735H 数据
LNP* Colorcomp* DX98735H is a compound based on Polycarbonate containing Proprietary Fillers. Characteristics of this grade are: Healthcare. This data is based on the blue color (BL5A350).

MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,5mm/min 640 kgf/cm² ASTM D 638
Tensile Stress,brk,Type I,5mm/min 550 kgf/cm² ASTM D 638
Tensile Strain,yld,Type I,5mm/min 6.3 % ASTM D 638
Tensile Strain,brk,Type I,5mm/min 66 % ASTM D 638
Tensile Modulus,50mm/min 23800 kgf/cm² ASTM D 638
Flexural Modulus,1.3mm/min,50mm span 25000 kgf/cm² ASTM D 790
Tensile Stress,yield,5mm/min 62 MPa ISO 527
Tensile Stress,break,5mm/min 58 MPa ISO 527
Tensile Strain,yield,5mm/min 6.2 % ISO 527
Tensile Strain,break,5mm/min 167 % ISO 527
Tensile Modulus,1mm/min 2240 MPa ISO 527
Flexural Stress 80 MPa ISO 178
Flexural Modulus,2mm/min 2280 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 256 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 10 cm-kgf/cm ASTM D 256
Multiaxial Impact 786 cm-kgf ISO 6603
Instrumented Impact Total Energy,23℃ 622 cm-kgf ASTM D 3763
Izod Impact,unnotched 80*10*4 +23℃ 212 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 9 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 139 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 132 ASTM D 648
CTE,-30℃ to 30℃,flow 6.80E-05 1/℃ ASTM D 696
CTE,-30℃ to 30℃,xflow 6.90E-05 1/℃ ASTM D 696
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 138 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 126 ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.21 - ASTM D 792
Density 1.21 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.14 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.6-0.8 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 0.8-1 % ASTM D 955
Moisture Absorption(23℃/50% RH) 0.21 % ISO 62
Source GMD,last updated:2010/10/07
Parameter Injection Molding Value Unit
Drying Temperature 120
Drying Time 4 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 300-315
Front-Zone 3 Temperature 310-320
Middle-Zone 2 Temperature 305-315
Rear-Zone 1 Temperature 295-305
Mold Temperature 80-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2010/10/07

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
 Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.PC/ABS T65 XF 流动性改进
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【LNP™Colorcomp™ Compound PC DX98735H