旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PC DX04401H 空心的聚碳酸酯,医疗级
  • 产 品:PC DX04401H 空心的聚碳酸酯,医疗级
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP* Colorcomp* Compound
LNP Colorcomp All Series
LNP* Colorcomp* resins contain colorants and special effects for a dazzling spectrum of colored materials. Among the offerings are opaque, translucent, and transparent resins, plus special effects, including edge glow, sparkle, glow, pearlescent, and thermochromic. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™Colorcomp™ Compound PC DX04401H 数据
Also known as:LNP™Colorcomp™Compound PDX-D-04401
Product reorder name:DX04401H
LNP* Colorcomp* DX04401H is an unfilled Polycarbonate. Added feature: Healthcare, Colorable

MECHANICAL Value Unit Standard
Tensile Stress,yield,50mm/min 630 kgf/cm² ASTM D 638
Tensile Stress,break,50mm/min 690 kgf/cm² ASTM D 638
Tensile Strain,yield,50mm/min 6 % ASTM D 638
Tensile Modulus,50mm/min 22500 kgf/cm² ASTM D 638
Hardness,Rockwell R 118 - ASTM D 785
Tensile Stress,yield 62 MPa ISO 527
Tensile Stress,break 68 MPa ISO 527
Tensile Strain,yield 6 % ISO 527
Tensile Strain,break 150 % ISO 527
Flexural Stress 98 MPa ISO 178
Flexural Modulus,2mm/min 2400 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ NB cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 76 cm-kgf/cm ASTM D 256
Izod Impact,notched 80*10*4 +23℃ 75 kJ/m² ISO 180/1A
Charpy Impact,notched,23℃ 25 kJ/m² ISO 179/2C
Charpy Impact,notched,-30℃ 12 kJ/m² ISO 179/2C
THERMAL Value Unit Standard
HDT,1.82 MPa,3.2mm,unannealed 122 ASTM D 648
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 120 ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.2 - ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.15 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.5-0.5 % ASTM D 955
Moisture Absorption(23℃/50% RH) 0.32 % ISO 62
Melt Volume Rate,MVR at 300℃/1.2 kg 12 cm³/10 min ISO 1133
OPTICAL Value Unit Standard
Refractive Index 1.586 - ASTM D 542
Refractive Index 1.586 - ISO 489
ELECTRICAL Value Unit Standard
Volume Resistivity 2.00E+17 Ohm-cm ASTM D 257
Dielectric Constant,1 MHz 3 - ASTM D 150
Dissipation Factor,100 Hz 0.001 - ASTM D 150
Dissipation Factor,1 MHz 0.002 - ASTM D 150
Source GMD,last updated:2012/08/24

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
 Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.PC/ABS T65 XF 流动性改进
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【LNP™Colorcomp™ Compound PC DX04401H