旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PBT 5720U 耐低温冲击,耐化学,紫外线稳定,PBT+PC合金
  • 产 品:PBT 5720U 耐低温冲击,耐化学,紫外线稳定,PBT+PC合金
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Xenoy* Resin
Xenoy* Resin All Series
Xenoy* alloys are a blend of semi-crystalline polyester (typically polybutylene terephthalate, PBT, or polyethylene terephthalate, PET) and polycarbonate (PC). The Xenoy family offers good chemical resistance, great impact resistance and toughness even at low temperatures, heat resistance, and outstanding aesthetic and flow characteristics.

XENOY™ Resin PBT+PC 5720U 数据表
Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY

Property
TYPICAL PROPERTIES (1)

MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,50mm/min 470 kgf/cm² ASTM D 638
Tensile Stress,brk,Type I,50mm/min 480 kgf/cm² ASTM D 638
Tensile Stress,yld,Type I,5mm/min 440 kgf/cm² ASTM D 638
Tensile Stress,brk,Type I,5mm/min 500 kgf/cm² ASTM D 638
Tensile Stress,yld,Type I,10mm/min 450 kgf/cm² SABIC-Japan Method
Tensile Stress,brk,Type I,10mm/min 470 kgf/cm² SABIC-Japan Method
Tensile Strain,yld,Type I,50mm/min 4 % ASTM D 638
Tensile Strain,brk,Type I,50mm/min 116.6 % ASTM D 638
Tensile Strain,yld,Type I,5mm/min 4.6 % ASTM D 638
Tensile Strain,brk,Type I,5mm/min 122.4 % ASTM D 638
Tensile Strain,yld,Type I,10mm/min 4.6 % SABIC-Japan Method
Tensile Strain,brk,Type I,10mm/min 109.5 % SABIC-Japan Method
Tensile Modulus,50mm/min 18500 kgf/cm² ASTM D 638
Tensile Modulus,5mm/min 18600 kgf/cm² ASTM D 638
Tensile Modulus,10mm/min 18700 kgf/cm² SABIC-Japan Method
Flexural Stress,yld,1.3mm/min,50mm span 710 kgf/cm² ASTM D 790
Flexural Stress,brk,1.3mm/min,50mm span 700 kgf/cm² ASTM D 790
Flexural Modulus,1.3mm/min,50mm span 16900 kgf/cm² ASTM D 790
Tensile Stress,yield,5mm/min 44 MPa ISO 527
Tensile Stress,break,5mm/min 43 MPa ISO 527
Tensile Stress,yield,50mm/min 47 MPa ISO 527
Tensile Stress,break,50mm/min 43 MPa ISO 527
Tensile Strain,yield,5mm/min 4.1 % ISO 527
Tensile Strain,break,5mm/min 106.8 % ISO 527
Tensile Strain,yield,50mm/min 4.6 % ISO 527
Tensile Strain,break,50mm/min 115.3 % ISO 527
Tensile Modulus,1mm/min 1790 MPa ISO 527
Flexural Stress,yield,2mm/min 71 MPa ISO 178
Flexural Modulus,2mm/min 1860 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,notched,23℃ 73 cm-kgf/cm ASTM D 256
Izod Impact,notched,0℃ 70 cm-kgf/cm ASTM D 256
Izod Impact,notched,-10℃ 67 cm-kgf/cm ASTM D 256
Izod Impact,notched,-20℃ 70 cm-kgf/cm ASTM D 256
Izod Impact,notched,-30℃ 65 cm-kgf/cm ASTM D 256
Izod Impact,notched,-40℃ 60 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 456 cm-kgf ASTM D 3763
Instrumented Impact,Energy @ peak,-20℃ 420 cm-kgf ASTM D 3763
Instrumented Impact Energy @ peak,-30 504 cm-kgf ASTM D 3763
Instrumented Impact Energy @ peak,-40℃ 504 cm-kgf ASTM D 3763
Instrumented Impact Total Energy,23℃ 550 cm-kgf ASTM D 3763
Instrumented Impact Total Energy,-20℃ 542 cm-kgf ASTM D 3763
Instrumented Impact Total Energy,-30℃ 631 cm-kgf ASTM D 3763
Instrumented Impact Total Energy,-40℃ 603 cm-kgf ASTM D 3763
Izod Impact,notched 80*10*4 +23℃ 55 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 0℃ 55 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -10℃ 52 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -20℃ 50 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -30℃ 48 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -40℃ 46 kJ/m² ISO 180/1A
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm 55 kJ/m² ISO 179/1eA
Charpy -30℃,V-notch Edgew 80*10*4 sp=62mm 47 kJ/m² ISO 179/1eA
THERMAL Value Unit Standard
Vicat Softening Temp,Rate B/50 119 ASTM D 1525
HDT,0.45 MPa,3.2mm,unannealed 108 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 83 ASTM D 648
HDT,0.45 MPa,6.4mm,unannealed 117 ASTM D 648
HDT,1.82 MPa,6.4mm,unannealed 95 ASTM D 648
CTE,-40℃ to 95℃,flow 9.75E-05 1/℃ ASTM E 831
CTE,-40℃ to 95℃,xflow 1.00E-04 1/℃ ASTM E 831
CTE,-30℃ to 80℃,flow 9.75E-05 1/℃ ISO 11359-2
CTE,-30℃ to 80℃,xflow 1.00E-04 1/℃ ISO 11359-2
Vicat Softening Temp,Rate B/50 119 ISO 306
Vicat Softening Temp,Rate B/120 122 ISO 306
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 109 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 87 ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.17 - ASTM D 792
Specific Volume 0.85 cm³/g ASTM D 792
Density 1.17 g/cm³ ASTM D 792
Mold Shrinkage,flow,3.2mm(5) 1-1.2 % SABIC Method
Melt Flow Rate,250℃/2.16 kgf 3.8 g/10 min ASTM D 1238
Melt Flow Rate,250℃/5.0 kgf 11.4 g/10 min ASTM D 1238
Melt Flow Rate,265℃/2.16kgf 6 g/10 min ASTM D 1238
Melt Flow Rate,266℃/5.0 kgf 19.7 g/10 min ASTM D 1238
Density 1.17 g/cm³ ISO 1183
Water Absorption,(23℃/sat) 0.28 % ISO 62
Moisture Absorption(23℃/50% RH) 0.08 % ISO 62
Melt Flow Rate,250℃/2.16 kg 3 g/10 min ISO 1133
Melt Flow Rate,250℃/5.0 kg 11 g/10 min ISO 1133
Melt Volume Rate,MVR at 250℃/2.16 kg 3 cm³/10 min ISO 1133
Melt Volume Rate,MVR at 250℃/5.0 kg 10 cm³/10 min ISO 1133
Melt Volume Rate,MVR at 265℃/2.16 kg 6 cm³/10 min ISO 1133
Melt Volume Rate,MVR at 265℃/5.0 kg 18 cm³/10 min ISO 1133
Source GMD,last updated:2007/07/31
Parameter Injection Molding Value Unit
Drying Temperature 110
Drying Time 4-6 hrs
Drying Time(Cumulative) 8 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 260-275
Nozzle Temperature 255-270
Front-Zone 3 Temperature 255-275
Middle-Zone 2 Temperature 250-270
Rear-Zone 1 Temperature 245-265
Mold Temperature 65-90
Back Pressure 0.3-0.7 MPa
Screw Speed 50-80 rpm
Shot to Cylinder Size 50-80 %
Vent Depth 0.013-0.02 mm
Source GMD,last updated:2007/07/31

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.pa6/66价格
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【XENOY™ Resin PBT+PC 5720U