旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PBT SHF4930 超高流动,阻燃PBT,玻纤15%增强
  • 产 品:PBT SHF4930 超高流动,阻燃PBT,玻纤15%增强
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Valox* Resin
Valox* Resin All Series
The Valox* family of thermoplastic polyester resins are semi-crystalline materials based on polybutylene terephthalate (PBT) and/or polyethylene terephthalate (PET) polymers. Valox resins are highly tailorable, combining heat, chemical resistance, and outstanding electrical properties with exceptionally good processability and surface appearance.

Valox* Resin PBT SHF4930 数据表
Super high flow FR PBT grade with 15% Glass reinforced

Property
TYPICAL PROPERTIES (1)

MECHANICAL Value Unit Standard
Tensile Stress,yield,5mm/min 90 MPa ISO 527
Tensile Stress,break,5mm/min 90 MPa ISO 527
Tensile Strain,yield,5mm/min 2.2 % ISO 527
Tensile Strain,break,5mm/min 2.2 % ISO 527
Tensile Modulus,1mm/min 6200 MPa ISO 527
Flexural Stress,yield,2mm/min 126 MPa ISO 178
Flexural Modulus,2mm/min 4700 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched 80*10*4 +23℃ 25 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 6 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -30℃ 6 kJ/m² ISO 180/1A
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm 6 kJ/m² ISO 179/1eA
THERMAL Value Unit Standard
CTE,-40℃ to 40℃,flow 3.50E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 9.50E-05 1/℃ ISO 11359-2
Vicat Softening Temp,Rate B/50 184 ISO 306
Vicat Softening Temp,Rate B/120 185 ISO 306
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 170 ISO 75/Af
PHYSICAL Value Unit Standard
Mold Shrinkage,flow(5) 0.5-0.8 % SABIC Method
Mold Shrinkage,xflow(5) 0.6-0.9 % SABIC Method
Density 1.5 g/cm³ ISO 1183
Water Absorption,(23℃/sat) 0.17 % ISO 62
Moisture Absorption(23℃/50% RH) 0.07 % ISO 62
Melt Volume Rate,MVR at 250℃/2.16 kg 16 cm³/10 min ISO 1133
FLAME CHARACTERISTICS Value Unit Standard
UL Compliant,94V-0 Flame Class Rating(3)(4) 0.8 mm UL 94 by SABIC-IP
Source GMD,last updated:2006/12/21
Parameter Injection Molding Value Unit
Drying Temperature 110-120
Drying Time 2-4 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 250-270
Nozzle Temperature 240-260
Front-Zone 3 Temperature 245-265
Middle-Zone 2 Temperature 240-255
Rear-Zone 1 Temperature 230-245
Hopper Temperature 40-60
Mold Temperature 40-100
Source GMD,last updated:2006/12/21

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.PPO WCA871A 耐温105度,满足UL阻燃及力学方面
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【Valox* Resin PBT SHF4930