旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PA66 RE0039 含炭纤维和阻燃剂.导电尼龙
  • 产 品:PA66 RE0039 含炭纤维和阻燃剂.导电尼龙
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP STAT-KON* POLYAMIDES COMPOUND
TOUGH, TAILORED ELECTRICAL PROPERTIES
Polyamide-based LNP Stat-Kon compounds contain electrically active additives that provide controlled surface resistivity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding.

LNP™ STAT-KON™ Compound PA66 RE0039 塑料数据物性表

Also known as:LNP™ Stat-kon™ Compound RC-1003 FR
Product reorder name:RE0039
LNP STAT-KON* RE0039 is a compound based on Nylon 66 resin containing Carbon Fiber, Flame Retardant. Added features of this material include: Electrically Conductive.

MECHANICAL Value Unit Standard
Tensile Stress,break 2090 kgf/cm² ASTM D 638
Tensile Strain,break 2.2 % ASTM D 638
Tensile Modulus,50mm/min 179200 kgf/cm² ASTM D 638
Flexural Stress 3030 kgf/cm² ASTM D 790
Flexural Modulus 116700 kgf/cm² ASTM D 790
Tensile Stress,break 209 MPa ISO 527
Tensile Strain,break 2.2 % ISO 527
Tensile Modulus,1mm/min 15600 MPa ISO 527
Flexural Stress 318 MPa ISO 178
Flexural Modulus 14200 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 71 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 7 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 82 cm-kgf ASTM D 3763
Multiaxial Impact 23 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 46 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 8 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,1.82 MPa,3.2mm,unannealed 247 ASTM D 648
CTE,-40℃ to 40℃,flow 4.57E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 6.60E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 4.57E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 6.61E-05 1/℃ ISO 11359-2
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 228 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.44 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.55 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.2-0.3 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 0.7-0.8 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 0.17-0.26 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 0.68-0.78 % ISO 294
Moisture Absorption(23℃/50% RH) 0.87 % ISO 62
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+02-1.E+06 Ohm ASTM D 257
FLAME CHARACTERISTICS Value Unit Standard
UL Compliant,94V-0 Flame Class Rating(3)(4) 1.5 mm UL 94 by SABIC-IP
UL Compliant,94-5VA Rating(3)(4) 1.5 mm UL 94 by SABIC-IP
Source GMD,last updated:2004/10/01
Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Maximum Moisture Content 0.15-0.25 %
Melt Temperature 280-305
Front-Zone 3 Temperature 295-305
Middle-Zone 2 Temperature 280-295
Rear-Zone 1 Temperature 265-275
Mold Temperature 95-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2004/10/01