旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PA612 IS000XXL 含不锈钢纤维,食品接触兼容的原材料
  • 产 品:PA612 IS000XXL 含不锈钢纤维,食品接触兼容的原材料
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™ STAT-KON™ Compound PA612 IS000XXL 塑料物性表

LNP* Stat-Kon* IS000XXL is a compound based on Nylon 6/12 containing Stainless Steel Fibers. Added features include: food contact compliant raw materials and metal detectable.

MECHANICAL Value Unit Standard
Tensile Stress,brk,Type I,5mm/min 680 kgf/cm² ASTM D 638
Tensile Strain,yld,Type I,5mm/min 9.3 % ASTM D 638
Tensile Strain,brk,Type I,5mm/min 10.2 % ASTM D 638
Tensile Modulus,50mm/min 31000 kgf/cm² ASTM D 638
Flexural Modulus,1.3mm/min,50mm span 27200 kgf/cm² ASTM D 790
Tensile Stress,break,5mm/min 66 MPa ISO 527
Tensile Strain,break,5mm/min 8.5 % ISO 527
Tensile Modulus,1mm/min 3070 MPa ISO 527
Flexural Stress 82 MPa ISO 178
Flexural Modulus,2mm/min 2430 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 49 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 2 cm-kgf/cm ASTM D 256
Multiaxial Impact 7 cm-kgf ISO 6603
Instrumented Impact Total Energy,23℃ 21 cm-kgf ASTM D 3763
Izod Impact,unnotched 80*10*4 +23℃ 35 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 3 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 180 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 92 ASTM D 648
CTE,-30℃ to 30℃,flow 1.02E-04 1/℃ ASTM D 696
CTE,-30℃ to 30℃,xflow 1.19E-04 1/℃ ASTM D 696
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 161 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 72 ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.18 - ASTM D 792
Density 1.18 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.2 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 1-3 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 2-4 % ASTM D 955
Moisture Absorption(23℃/50% RH) 0.29 % ISO 62
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+02 - 1.E+06 Ohm ASTM D 257
Source GMD,last updated:2011/04/19
Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Maximum Moisture Content 0.12-0.2 %
Melt Temperature 270-275
Front-Zone 3 Temperature 270-280
Middle-Zone 2 Temperature 260-270
Rear-Zone 1 Temperature 255-265
Mold Temperature 65-95
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2011/04/19