旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PA6 PS003E 导电级,EMI/RFI屏蔽,包含不锈钢
  • 产 品:PA6 PS003E 导电级,EMI/RFI屏蔽,包含不锈钢
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP* Faradex* Compound
LNP Faradex Resin All Series
LNP* Faradex* compounds provide electromagnetic and radio frequency interference (EMI/RFI) attenuation in applications from electronics to material handling. Faradex compounds can also be used in applications where electrostatic discharge (ESD) is required. Faradex* compounds provide mechanical properties, part weight and a design freedom similar to standard unfilled base resins. LNP* specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™ Faradex™ Compound PA6 PS003E 塑料物性

Also known as:LNP™Faradex™Compound PS-1003
Product reorder name:PS003E
LNP* Faradex* PS003E is a compound based on Nylon 6 resin containing Stainless Steel. Added features of this material include: Electrically Conductive, EMI/RFI Shielding.

MECHANICAL Value Unit Standard
Tensile Stress,yield 560 kgf/cm² ASTM D 638
Tensile Stress,break 560 kgf/cm² ASTM D 638
Tensile Strain,yield 9.6 % ASTM D 638
Tensile Strain,break 23 % ASTM D 638
Tensile Modulus,50mm/min 32200 kgf/cm² ASTM D 638
Flexural Stress 840 kgf/cm² ASTM D 790
Flexural Modulus 23600 kgf/cm² ASTM D 790
Tensile Stress,yield 53 MPa ISO 527
Tensile Stress,break 53 MPa ISO 527
Tensile Strain,yield 3.3 % ISO 527
Tensile Strain,break 8.6 % ISO 527
Tensile Modulus,1mm/min 3000 MPa ISO 527
Flexural Stress 81 MPa ISO 178
Flexural Modulus 2400 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 39 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 4 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 21 cm-kgf ASTM D 3763
Izod Impact,unnotched 80*10*4 +23℃ 43 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 4 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 186 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 62 ASTM D 648
CTE,-40℃ to 40℃,flow 7.02E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 7.56E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 3.95E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 4.28E-05 1/℃ ISO 11359-2
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 171 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 58 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.22 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 1.3 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 72 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 100 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 0.72 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1 % ISO 294
Density 1.22 g/cm³ ISO 1183
ELECTRICAL Value Unit Standard
Volume Resistivity 1.00E+04 Ohm-cm ASTM D 257
Surface Resistivity 1.00E+03 Ohm ASTM D 257
Source GMD,last updated:2006/12/20

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
 Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.Q胶 PB-5925 透明衣架专用

关健字:【LNP™ Faradex™ Compound PA6 PS003E