快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
VECTRA® E135I VC3052 GRAY
VECTRA® E135I VD3005 BLACK
VECTRA® E135I VF3001 NATURAL
VECTRA E135i | LCP | Glass Reinforced
Description
35% glass fiber filled /Higher weldline strength.
Chemical abbreviation according to ISO 1043-1 : LCP
Inherently flame retardant.
FDA compliant.
UL-Listing V-0 in all colors at .15mm thickness per UL 94 flame testing.
UL = Underwriters Laboratories (USA)
ISO Data | Physical properties | Value | Unit | Test Standard |
Phys | Density | 1670 | kg/m³ | ISO 1183 |
Mold shrinkage - parallel | 0 | % | ISO 294-4 | |
Mold shrinkage - normal | 0.29 | % | ISO 294-4 | |
Water absorption (23℃-sat) | 0.07 | % | ISO 62 | |
Mech | Mechanical properties | Value | Unit | Test Standard |
Tensile modulus (1mm/min) | 16000 | MPa | ISO 527-2/1A | |
Tensile stress at break (5mm/min) | 150 | MPa | ISO 527-2/1A | |
Tensile strain at break (5mm/min) | 1.5 | % | ISO 527-2/1A | |
Flexural modulus (23℃) | 17000 | MPa | ISO 178 | |
Flexural strength (23℃) | 225 | MPa | ISO 178 | |
Flexural strain @ break | 2.1 | % | ISO 178 | |
Compressive stress @ 1% strain | 100 | MPa | ISO 604 | |
Charpy impact strength @ 23℃ | 40 | kJ/m² | ISO 179/1eU | |
Charpy notched impact strength @ 23℃ | 27 | kJ/m² | ISO 179/1eA | |
Unnotched impact str (Izod) @ 23℃ | 40 | kJ/m² | ISO 180/1U | |
Notched impact strength (Izod) @ 23℃ | 30 | kJ/m² | ISO 180/1A | |
Compressive modulus | 13500 | MPa | ISO 604 | |
Rockwell hardness | 62 | M-Scale | ISO 2039-2 | |
Therm | Thermal properties | Value | Unit | Test Standard |
Melting temperature (10℃/min) | 335 | ℃ | ISO 11357-1,-2,-3 | |
DTUL @ 1.8 MPa | 275 | ℃ | ISO 75-1/-2 | |
Vicat softening temperature B50 (50℃/h 50N) | 200 | ℃ | ISO 306 | |
Coeff.of linear therm. expansion (parallel) | 0.05 | E-4/℃ | ISO 11359-2 | |
Coeff.of linear therm. expansion (normal) | 0.59 | E-4/℃ | ISO 11359-2 | |
Elec | Electrical properties | Value | Unit | Test Standard |
Relative permittivity - 1 MHz | 4.1 | - | IEC 60250 | |
Dissipation factor - 1 MHz | 30 | E-4 | IEC 60250 | |
Volume resistivity | 1.00E+14 | Ohm*m | IEC 60093 | |
Surface resistivity | 1.00E+15 | Ohm | IEC 60093 | |
Electric strength | 28 | kV/mm | IEC 60243-1 | |
Comparative tracking index CTI | 175 | - | IEC 60112 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.01%
VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40℃. The time between drying and processing should be as short as possible.
Drying time (h):4
Drying temperature (℃):150 - 150