快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
- 产 品：LCP A130 热稳定,30玻璃纤维增强,耐化学
- 产 地：泰科纳
- 价 格：电话报价
- 库 存：20吨
- 交 货：江苏苏州
- 苏州希普能：185 5121 3137 谭经理
VECTRA® A130 VA3068 WHITE
VECTRA® A130 VC3030 GRAY
VECTRA® A130 VC3059SP GRAY
VECTRA® A130 VF3001 NATURAL
VECTRA® A130 VG3010 BLUE
VECTRA® A130 VG3010SP20 BLUE
VECTRA® A130 VG3042 BLUE
VECTRA® A130 VG3042SP10 BLUE
VECTRA® A130 VJ3009 GREEN
VECTRA® A130 VJ3040SP10 GREEN
VECTRA® A130 VS3035SP10 RED
VECTRA® A130D-1 VD3004 BLACK
VECTRA® A130D-2 VD3005 BLACK
VECTRA® A130D-3 VD3006 BLACK
VECTRA A130 | LCP | Glass Reinforced
Description
The Standard for the Industry. Excellent balance of properties, including easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties. Suitable for vapor phase surface mount electrical and electronic devices. 30% glass reinforced
Chemical abbreviation according to ISO 1043-1 : LCP
Inherently flame retardant
FDA compliant
UL-Listing V-0 in natural and black at 0.2mm thickness per UL 94 flame testing, and UL-5VA in natural at 1.5mm. Relative-Temperature-Index (RTI) according to UL 746B: electricals 240℃, mechanicals 220℃ at 0.85mm.
UL = Underwriters Laboratories (USA)
Other Processing
Injection Molding
A three-zone screw evenly divided into feed, compression, and metering zones is preferred. A higher percentage of feed flights may be needed for smaller machines: 1/2 feed, 1/4 compression, 1/4 metering.
Vectra LCPs are shear thinning, their melt viscosity decreases quickly as shear rate increases. For parts that are difficult to fill, the molder can increase the injection velocity to improve melt flow.
| ISO Data | Physical properties | Value | Unit | Test Standard |
| Phys | Density | 1620 | kg/m³ | ISO 1183 |
| Mold shrinkage - parallel | 0.2 | % | ISO 294-4 | |
| Mold shrinkage - normal | 0.4 | % | ISO 294-4 | |
| Humidity absorption (23℃/50%RH) | 0.04 | % | ISO 62 | |
| Mech | Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus (1mm/min) | 15000 | MPa | ISO 527-2/1A | |
| Tensile stress at break (5mm/min) | 190 | MPa | ISO 527-2/1A | |
| Tensile strain at break (5mm/min) | 2.1 | % | ISO 527-2/1A | |
| Tensile creep modulus (1h) | 12600 | MPa | ISO 899-1 | |
| Tensile creep modulus (1000h) | 10900 | MPa | ISO 899-1 | |
| Flexural modulus (23℃) | 14500 | MPa | ISO 178 | |
| Flexural strength (23℃) | 280 | MPa | ISO 178 | |
| Compressive stress @ 1% strain | 100 | MPa | ISO 604 | |
| Charpy impact strength @ 23℃ | 33 | kJ/m² | ISO 179/1eU | |
| Charpy notched impact strength @ 23℃ | 26 | kJ/m² | ISO 179/1eA | |
| Unnotched impact str (Izod) @ 23℃ | 29 | kJ/m² | ISO 180/1U | |
| Notched impact strength (Izod) @ 23℃ | 24 | kJ/m² | ISO 180/1A | |
| Compressive modulus | 14500 | MPa | ISO 604 | |
| Rockwell hardness | 85 | M-Scale | ISO 2039-2 | |
| Therm | Thermal properties | Value | Unit | Test Standard |
| Melting temperature (10℃/min) | 280 | ℃ | ISO 11357-1,-2,-3 | |
| DTUL @ 1.8 MPa | 235 | ℃ | ISO 75-1/-2 | |
| DTUL @ 0.45 MPa | 250 | ℃ | ISO 75-1/-2 | |
| DTUL @ 8.0 MPa | 190 | ℃ | ISO 75-1/-2 | |
| Vicat softening temperature B50 (50℃/h 50N) | 160 | ℃ | ISO 306 | |
| Coeff.of linear therm. expansion (parallel) | 0.06 | E-4/℃ | ISO 11359-2 | |
| Coeff.of linear therm. expansion (normal) | 0.23 | E-4/℃ | ISO 11359-2 | |
| Limiting oxygen index (LOI) | 45 | % | ISO 4589 | |
| Flammability at thickness h | V-0 | class | UL94 | |
| Elec | Electrical properties | Value | Unit | Test Standard |
| Relative permittivity - 100 Hz | 4.2 | - | IEC 60250 | |
| Relative permittivity - 1 MHz | 3.7 | - | IEC 60250 | |
| Dissipation factor - 100 Hz | 160 | E-4 | IEC 60250 | |
| Dissipation factor - 1 MHz | 180 | E-4 | IEC 60250 | |
| Volume resistivity | 1.00E+13 | Ohm*m | IEC 60093 | |
| Surface resistivity | >1E15 | Ohm | IEC 60093 | |
| Electric strength | 31 | kV/mm | IEC 60243-1 | |
| Comparative tracking index CTI | 175 | - | IEC 60112 | |
| Arc resistance | 140 | s | Internal | |
| SpecProd | Test specimen production | Value | Unit | Test Standard |
| Injection molding melt temperature | 293 | ℃ | ISO 294 | |
| Injection molding mold temperature | 60 | ℃ | ISO 294 | |
| Injection molding flow front velocity | 150 | mm/s | ISO 294 | |
| Injection molding hold pressure | 48 | MPa | ISO 294 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.01%
VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40℃. The time between drying and processing should be as short as possible.
For subsequent storage of the material in the dryer until processed the temperature does not need to be lowered for grades A, B, C, D and V (<= 24 h).
Drying time (h):4-6
Drying temperature (℃):150-150